Introduction
One of the ways to ensure machines will last for a long time in their optimal condition is to frequently apply lubricating oil on them. Doing so reduces friction in the metallic parts of the machine and prevents different kinds of problems in the long run. Lubricating your equipment can be a huge hassle, but that won’t be the case if you have a machine that can do the job for you. It’s a good thing that you can use lubrication pumps to help you with the task.
Here at Compresstech Resources, Inc., we offer high-quality lubrication pumps in the Philippines. You can use them to easily lubricate your machines and keep them functioning well. Get in touch with us today to learn more about the products we offer.
What Are Lubrication Pumps in the Philippines?
In general, lubrication refers to the process of applying oil, grease, or any other type of lubricant to machines. It’s an important procedure that should never be neglected. After all, doing so prevents all sorts of problems, such as:
• Too Much Friction – The primary reason you apply lubricants is to minimize friction on the metal components of the machine. Without doing so, the parts will easily corrode or break. Repairing or replacing them can cost you a ton, depending on the severity of the damage.
• Overheating – Because friction generates high temperatures, it goes without saying that poor lubrication can sometimes result in overheating. When this happens, the bearings of the machine will fail, and the equipment itself will stop functioning normally.
• Unnecessary Noise – Machines used in factories typically produce a lot of noise, but the sound caused by poor lubrication is entirely different. If you hear grinding and clanking from inside the equipment while it’s switched on, consider it a sign of improper lubrication. Apply grease or oil in the bearings right away to solve the problem.
• Contamination – Dust, germs, and other microbes can enter the machine and cause a great deal of damage in the long run. Many people fail to realize that the ingress of these external elements can be prevented by proper lubrication. Oil and grease can “seal” the crevices where outdoor particles can enter.
• Wear and Tear – Friction between two metal parts of the machine leads to premature wear and tear. The surfaces of these components will chip away or get deformed, which can lead to bigger problems in the future. This won’t happen if you apply enough lubrication to control the friction in the internal mechanisms of the equipment.
These are just a few of the issues you can avoid if you have proper lubrication, so be sure not to neglect it. However, it’s important to exercise caution when lubricating. It’s advisable to turn off the machine when applying lubricants, but doing so can cause delays in your operations. Thankfully, there’s a way for you to safely lubricate your equipment without having to switch it off. This can be done by using lubrication pumps in the Philippines.
As the name suggests, they are separate machines that facilitate fast, safe, and easy lubrication of other pieces of equipment, such as air compressors. Even though they are typically used for just one job, these pumps are vital in various industries and are a significant investment for any company. The upfront costs of these lubrication pumps can be pretty high, but business owners are bound to benefit from them in the long run.
If you’re looking for a lube oil pump for compressors and other machines, check out our products at Compresstech. Our company offers lubrication pumps in the Philippines that you can use for various applications. Get in touch with us today to learn more!
Essential Components of Lubrication Systems
Not all lubrication systems in the Philippines are the same. However, even though they are entirely unique from each other, the way they work is not too different. They all work using these essential components:
Pump and Reservoir
The lubricant itself is stored inside the reservoir, so it’s necessary to check this part regularly to ensure that it has enough content. Meanwhile, pumps are responsible for expelling the oil and ensuring it flows steadily. Without this component, it won’t be possible for the lubricant to reach the hoses and be distributed to different parts of the machine.
Here at Compresstech, we offer grease pumps made by Ompi, an Italian manufacturing company. This product can be mounted on 16-kg barrels and can sustain a maximum pressure of up to 250 bars (3,625 psi).
Hoses and Fittings
Lubricating oil is applied not just in a single part of the machine. The bearings and other essential components will deteriorate if they don’t have enough oil. To ensure that they are properly lubricated, hoses are needed to distribute oil to the necessary lubrication points. Meanwhile, the fittings are installed to prevent leakage, which wastes lubricants in the process.
Other Accessories
There are optional accessories that you might want to install in your lubrication pump. Here are a few examples:
• Metering Device – Not all parts of the machine need the same amount of lubricant. The metering device helps you ensure that each component only receives the right amount of oil they require.
Compresstech is here to provide you with high-quality products. That’s why we offer this metering device made by Ompi. Since it’s made by a trusted manufacturer from Italy, you can rest assured it will stand the test of time and will not get damaged easily.
• Controller – With a controller, you can activate and monitor the system at will. You can decrease or increase the flow of lubricants as you see fit. In some cases, the controller itself will indicate if you have low oil levels in your reservoir so you can refill it right away.
• Pressure Gauge – With this gauge, you can learn if your lubrication system is using the right amount of pressure. This component will indicate if there’s too much or too little pressure, which can cause the lubrication pump to break down.
Different Industries That Rely on Lubrication Pumps in the Philippines
Lubrication pumps are quite versatile, so it’s not surprising that they are used by many companies across all industries. Here are some ways these machines are being used in day-to-day operations:
What Company Can You Turn to for Lubrication Pumps in the Philippines?
If you need lubrication pumps in the Philippines, it’s important to find a supplier that you can trust. Partner with us here at Compresstech Resources Inc. We are a trusted company that offers high-quality devices, such as lubrication pumps. So, if you require one for your operations, do not hesitate to get in touch with us. Our staff members are all friendly, and they will be more than happy to assist you and answer your queries.
Lubrication Pumps in the Philippines Compresstech Resources Inc. Offers
Compresstech Resources Inc. is your trusted partner if you want to purchase various energy-efficient compressed air systems in the Philippines. We also offer a wide range of lubrication pumps to choose from, and here are some of them:
Mounted Oil Dispensing System With IBC Tank
Rotary Drum Pump
Oil Gun With Meter
Manual Oil Pump
Grease Gun With Meter
Wall Mounted Diesel Pump
Manual Grease Pump
Hose Reel
Pneumatic Oil Pump
Pneumatic Grease Pump
Waste Oil Evacuation Drain
Conclusion
Proper lubrication is essential to make certain that the machines you use for your business will work properly. Using oil, grease, and other types of lubricants is necessary to keep your pieces of equipment in tip-top condition for a long time. The problem, however, is that applying fluids is anything but easy. Thankfully, there are now many tools you can use to get the job done more efficiently.
Compresstech Resources Inc. is here to offer high-quality lubrication pumps in the Philippines. All the items we sell are durable and long-lasting because they come from well-known and trusted brands from different parts of the world. We even offer lube oil pumps for compressors and other machines!
If you wish to learn more about us and the products that we sell, contact us today. Our lines are always open for any inquiries that you may have.