loader image
 

Count on Us To Provide You With Quality Air Tools in the Philippines

Introduction

Air is a versatile resource you can use to get various jobs done quickly. It can be utilized in a variety of ways, such as powering devices for construction work. In fact, pneumatic tools are used in various industries, including mining, manufacturing, and automotive.

Compresstech Resources is a trusted air tools distributor in the Philippines. We offer various products, including grinders, drills, nibblers, ratchets, and more. For more information, get in touch with us today.

What Are Air Tools?

An air tool, or a pneumatic tool, is a type of device that is powered by compressed air. Its high power-to-weight ratio contributes to low operator fatigue. Furthermore, since air tools run cooler and do not generate heat when used, they do not pose a danger as a fire hazard.

How Do Air Tools Work?

Air tools in the Philippines have compressors where air is sent through a regulator that’s set to a required pressure. The air leaves the regulator through a hose mounted to the tool using a quick-release coupler.

Afterward, the air enters the tool and is fed through a pneumatic motor that converts the compressed air’s energy into mechanical energy. Linear-action tools, such as nail guns, usually have a piston-style actuator, while rotary-action tools, like hammer drills, use a geared or turbine-style motor. Pulling the trigger on the tools sends air into the motor and causes the tool to turn on.

What Size Does Your Compressor Need To Be for Air Tools?

Pneumatic air tools in the Philippines come in various sizes. However, their dimensions don’t necessarily determine whether a compressor is powerful enough for your tool. Instead of assessing an air compressor’s capability by how large or small it is, operators should look at how much air it delivers, measured in cubic feet per minute (CFM).

Most air compressors that are meant for powering tools required 10CFM to 110CFM. Compressors that supply air with lower CFM are meant for smaller tools, such as chippers, grinders, and sanders. On the other hand, those that supply air with higher CFM are designed for larger tools, including 1” impact wrenches, rock drills, and 90lb jackhammers.

If you aren’t sure, it is best to talk to a professional. At Compresstech Resources, we would be more than happy to help you find the best air tool that meets your needs. Reach out to us today.

What Is the Difference Between Air and Electric Tools?

Air Tools Electric Tools
Their power can be adjusted using the air compressor. The power each tool has is constant and usually can’t be changed.
Each tool is available at a lower price. However, you need to invest in an air compressor if you don’t have one yet. Tools can be expensive, since they come with their own power source
They are easier to carry since they are lighter, but they don’t have a cordless option. You can easily move around when using the tool, but they are a bit heavier.
Some air tools now have Bluetooth. Select electric tools are available with Bluetooth.

Torque 

The most crucial factor to consider when choosing between air and electric tools is the material that you’re working with. If you need to cut through steel, you also need a certain amount of torque.

Pneumatic tools are notoriously strong. The amount of punch they can offer can be adjusted by allowing the air compressor to deliver more or less power. On the other hand, electric tools are less powerful and may not be able to cut or drill through what pneumatic tools can.

Cost

Spending too much on a tool is a waste but spending too little may not get you what you need. When considering costs, you must find the balance between the amount you are spending and the performance you’re getting with the type of power tool you choose.

Air tools in the Philippines have higher upfront costs compared to back-end costs. They are usually less expensive, and they tend to last longer than their electronic counterparts. However, to power an air tool, you need to have a compressor, which can be expensive.

Electronic tools require less investment since they have their power source. They are usually available at a lower price because of this.

Feel

Power tools have a variety of grips—each device having a different weight as well. These factors play an important role, since you may need to hold a tool for hours at a time.

Pneumatic tools are light yet limiting. Although they weigh less, they do not have a cordless option because a hose needs to connect them to a compressor.

If you’re looking for a device that makes moving around easier, then electric tools have various options where you won’t have to stand so close to an outlet. You also won’t have anything to possibly trip over or get tangled in.

Technology 

With the development of technology, people have also slowly started upgrading power tools. Some air tools now have Bluetooth technology, which means that you can gather data from each device. You can find out the angles you are working on as well as the torque the tool has.

Similarly, electric tools come equipped with innovative technology. Some devices also have Bluetooth, informing you when your device is running hot or if your cordless power tool needs to be recharged.

What Are the Different Types of Air Tools for Sale in the Philippines?

Compresstech Resources is a reliable air tools supplier in the Philippines. Our products include:

Air Angle Grinder

Key Features

  • 1 HP motor with controller
  • Equipped with a 4-inch abrasive wheel
  • Has a rear exhaust with piped-away option
  • Light and ergonomic yet powerful
  • Locking lever with tease throttle
  • Provides minute control during polishing, grinding, and other finishing work

Uses

  • Good for heavy-duty work
  • Has abrasive discs to cut through steel, concrete, and other solid materials

Air Cut-Off Too

 

Key Features

  • 3/8” arbor x 2 7/8” wheel size
  • 360-degree rotatable, chrome-plated spark guard
  • Built-in speed regulator
  • Locking lever with tease throttle

Uses

  • Cuts off mufflers, tailpipes, and other pieces of metal quickly and efficiently
  • Powerful enough for exhaust replacement

 Air Die Grinder

Key Features

  • 3/8” arbor x 2 7/8” wheel size
  • 360-degree rotatable, chrome-plated spark guard
  • Built-in speed regulator
  • Locking lever with tease throttle

Uses

  • Cuts off mufflers, tailpipes, and other pieces of metal quickly and efficiently
  • Powerful enough for exhaust replacement

 Air Drill

Key Features

  • 1/2 HP motor
  • 3/8” arbor x 2 7/8” wheel size
  • Built-in speed regulator
  • Locking lever with tease throttle
  • Reversible motor with quick reverse lever

Uses

  • Drills holes into different surfaces
  • Models can range in size from a dental drill to an industrial jackhammer

Leave a Reply

Your email address will not be published. Required fields are marked *