9 Important Air Tool Safety Tips You Need To Know

Air Tool Safety Tips

Air tools come in handy for several hazardous jobs and iit is an absolute must to observe air tool safety regulations. 

 

Department Order No. 13, or the “Occupational Safety and Health Standards” serves as a safety guide for every construction to follow. However, there are specifics to follow especially equipped with pneumatic tools. With that, here are some safety guidelines to keep in mind particularly when handing air tools.  

 

9 Air Tool Safety Guidelines To Follow at All Times

 

Reminders Before Operation

 

1. Gear Up

Never forget to use safety equipment, no matter how small you think the project is. Handling tools that may cause chipping or grinding means you need to wear proper safety goggles to shield your eyes. And with the close range at which you will be working with these tools, you will also need to protect your ears by wearing ear protection as well.

 

2. Choose Wisely

You need to be smart as to which tool will perform the application that you require. Choosing the wrong tool for the wrong job can be dangerous, especially that they are designed to do certain tasks specific to certain jobs. 

 

3. Follow Manufacturer Guidelines

Pushing equipment beyond their limit may result in catastrophic consequences. Going beyond manufacturer ratings may result in overheating or tool malfunction, which puts you and everyone around at risk.  

 

4. Check Your Surroundings

Make sure that attachments aren’t loose and equipment is plugged in properly. Look out for tripping hazards and always survey the scene before operating tools that may affect anyone nearby. 

 

Safety Tips On the Job

 

5. Maintain a Safe Distance

Tools may snag on clothes or hair if not kept in proper distance. Do not bring these tools too near your face or other body parts. And as mentioned earlier, put on the appropriate safety gear.

 

6. Handle With Care

Always operate these machines with proper care. With the power that these tools posses, something may go wrong if you don’t hold them properly and securely. Remember, as useful as they are, there is always a chance that something might go wrong.

 

Instructions When Not In Use

 

7. Turn Off Properly

When you no longer need to use them, then there’s no need for them to be left plugged in. It is always advised not to leave air tools unattended, even if it’s just for a short while. Make sure all switches are turned off fully before going on break.

 

8. Store in the Right Place 

Keep tools out of reach from children, even if they are unplugged. It is also best that you don’t leave them anywhere on the floor or in places where they can be a hazard to others. Most tools come with protective cases so storing them would not be a problem.

 

9. Take Care of Your Tools

Prevent accidents from happening by conducting proper maintenance of your tools every so often. When you take care of your tools, the higher the chance they have to perform better and last on your shelf for a longer period of time.

 

Also Read: 7 Air Tool Maintenance Tips You Need To Know

 

When it comes to air tool safety, it is best to take into consideration what can be done to prevent accidents from happening. So always take precautions and follow guidelines. And when you don’t know what you’re doing, don’t hesitate to consult the instruction manual. When it comes to dangerous tasks, it is always better safe than sorry.  

Aside from always staying cautious when using such tools, it is important that your tools have safety features that may prevent dangerous mishaps. Compresstech Resources Inc. is a trusted supplier of quality air tools that have components that ensure much safety when handled properly. Contact us now to avail of our air tools and other compressed air equipment.

Leave a Reply

Your email address will not be published. Required fields are marked *